Feature
- Two Fiber ports and one/two CAN
- Connection of bus type for fiber optic
- Converts CAN signals to fiber and fiber to CAN signals
- Transmits up to 10 km over optical fiber
- Bit rates up to 1 Mbit/s
- Compliant with CAN specifications 2.0A and 2.0B
- One/two independent CAN communication ports
- CAN Port galvanic isolation: 3000V DC-DC Power isolation, 2500V Signal isolation
Overview
The CANFiber Converters are used to convert CAN signals from copper to optical fiber. Communication between two Fiber Ports and CAN(one/two). Transmits up to 10 km over optical fiber. One/two independent CAN communication ports. CAN Port galvanic isolation: 3000V DC-DC Power isolation, 2500V Signal isolation.
Fiber Communication
Number of Ports: two fiber ports, single/double fiber opctic
Connector: SC/ST/FC connector
Wavelength: 850nm/1310nm/1550nm
Support Cable: multi-mode62.5/125um, single-mode9/125um
Transmission Distance : Transmits up to 10 km over optical fiber(The transmission distance is limited by the signal rate, as indicated in the ISO 11898-2 standard.)
CAN Communication
CAN Ports: 1/2
CAN Specification: Compliant with CAN specifications 2.0A (11-bit ID) and 2.0B (29-bit ID)
Connector Type: 3-pin removable screw terminal
Signal Support: CAN_H, CAN_L, GND
Isolation Protection: 3000V DC-DC Power isolation, 2500V Signal isolation
LED Indicators: Power, FO, CAN1, CAN2
Termination Resistor: Dip switch selector for 120 Ω terminal resistor.
Configuration
Configuration Software: CANFiberConfigTools for windows.
Physical Characteristics
Dimensions: 103 x 72 x 20 mm
Environmental Limits
Operating Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Power Requirements
Input Voltage: 9 to 32 VDC power inputs
Connector Type: 2-pin removable screw terminal
Power Consumption: 180mA @ 12 V
Housing
DIN-Rail mounting (standard), Wall mounting (optional)
