Feature
- Couple using, Support point to point connection of Fiber Opctic
- Transmits up to 10 km over optical fiber
- Converts CAN signals to fiber and fiber to CAN signals
- Bit rates up to 1 Mbit/s
- Compliant with CAN specifications 2.0A and 2.0B
- One/two independent CAN communication ports
- CAN Port galvanic isolation: 3000V DC-DC Power isolation, 2500V Signal isolation
Overview
The CANFiber Converters are used to convert CAN signals from copper to optical fiber. Couple using, Support point to point connection of Fiber Opctic. Transmits up to 10 km over optical fiber. One/two independent CAN communication ports. CAN Port galvanic isolation: 3000V DC-DC Power isolation, 2500V Signal isolation.
Fiber Communication
Number of Ports: 1 fiber ports, single/double fiber opctic
Connector: SC/ST/FC connector
Wavelength: 850nm/1310nm/1550nm
Support Cable: multi-mode62.5/125um, single-mode9/125um
Transmission Distance : Transmits up to 10 km over optical fiber(The transmission distance is limited by the signal rate, as indicated in the ISO 11898-2 standard.)
CAN Communication
CAN Ports: 1/2
CAN Specification: Compliant with CAN specifications 2.0A (11-bit ID) and 2.0B (29-bit ID)
Connector Type: 3-pin removable screw terminal
Signal Support: CAN_H, CAN_L, GND
Isolation Protection: 3000V DC-DC Power isolation, 2500V Signal isolation
LED Indicators: Power, FO, CAN1, CAN2
Termination Resistor: Dip switch selector for 120 Ω terminal resistor.
Configuration
Configuration Software: CANFiberConfigTools for windows.
Physical Characteristics
Dimensions: 103 x 72 x 20 mm
Environmental Limits
Operating Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Power Requirements
Input Voltage: 9 to 32 VDC power inputs
Connector Type: 2-pin removable screw terminal
Power Consumption: 180mA @ 12 V
Housing
DIN-Rail mounting (standard), Wall mounting (optional)