Feature
- Communication between Ethernet(Fiber Ports) and CAN
- One 100BaseFX ports (SC/ST/FC connector)
- One 10/100 Mbit/s Ethernet (10Base-T/100Base-T)
- Data transmission using TCP or UDP
- Bit rates up to 1 Mbit/s
- Compliant with CAN specifications 2.0A and 2.0B
- One/two independent CAN communication ports
- CAN Port galvanic isolation: 3000V DC-DC Power isolation, 2500V Signal isolation
Overview
The LCFNET allows the connection of different CAN busses over IP networks. CAN frames are wrapped in TCP or UDP message packets and then forwarded via the IP net from one device to the other.
The LCFNET provides one LAN(Fiber Port) connection , one LAN(RJ45 Port) connection and one/two CAN interfaces. With its DIN rail casing and the support of the extended temperature range, the module is suitable for use in an industrial environment.
The configuration of the device is done via a software tool. Besides a variety of status information, settings for the device itself, for the communication interfaces, and for message routing are provided.
Ethernet interface(RJ45 Port)
Number of Ports: 1
Speed: 10/100 Mbps, auto MDI/MDIX
Connector: RJ45 (magnetic)
Magnetic Isolation Protection: 1.5 KV built-in
LEDs: 10BASE-T & 100BASE-TX Link Activity
Ethernet interface(Fiber Port)
Number of Ports: 1
Connector: 100BaseFX ports (SC/ST/FC connector)
CAN Communication
CAN Ports: 1/2
CAN Specification: Compliant with CAN specifications 2.0A (11-bit ID) and 2.0B (29-bit ID)
Connector Type: 3-pin removable screw terminal
Signal Support: CAN_H, CAN_L, GND
Isolation Protection: 3000V DC-DC Power isolation, 2500V Signal isolation
LED Indicators: Power, SYS, CAN1, CAN2
Configuration
Configuration Software: EthCanPort
Software
Network Protocols: ETHERNET,ARP,IP,ICMP,IGMP,UDP,TCP, HTTP,DHCP,DNS
Operating Systems: Windows XP/2003/Vista/2008/7 (x86 and x64)
programming: programming interface consisting of an interface DLL, examples, and header files for all common programming languages
Test tools: LIKE CANTest for Windows, EthCanPort for Windows
Physical Characteristics
Dimensions: 103 x 72 x 20 mm
Environmental Limits
Operating Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Power Requirements
Input Voltage: 9 to 32 VDC power inputs
Connector Type: 2-pin removable screw terminal
Power Consumption: 180 mA @ 12 V
Housing
Plastic housing for top hat rail mounting
