Feature
- CAN 2.0A and CAN 2.0B supported
- One/Two/Four independent CAN communication ports
- CAN Port galvanic isolation: 3000V DC-DC Power isolation, 2500V Signal isolation
- CAN transfer rate up to 1 Mbps
- Optional 120 ohm terminal resistor for CAN bus network
- DLL library and examples included
- Windows driver provided
Overview
LIKE's LCPCI CAN (Controller Area Network) interface board supports the Universal PCI interface. As a stand-alone CAN controller, the LCPCI a cost-effective solution that provides one/two/four active CAN controllers with a DB9 connector on the same board. The LCPCI-25x CAN interface board uses the NXP SJA1000 and transceiver PCA82C251, which provide the bus arbitration and error detection. The -40 to 85°C wide operating temperature and 2.5 KV isolation make the boards suitable for use in harsh industrial environments.
PC interface
Universal PCI
CAN Communication
CAN Ports: 1/2/4
CAN Specification: Compliant with CAN specifications 2.0A (11-bit ID) and 2.0B (29-bit ID)
Signal Support: CAN_H, CAN_L, GND
Connector Type: D-Sub, 9-pin (in accordance with CiA® 102)
Termination Resistor: 120 ohm (selected by jumper)
Transfer Rate: Up to 1 Mbps
Isolation Protection: 3000V DC-DC Power isolation, 2500V Signal isolation
ESD Protection: Supports 15 KV
LED Indicators: Power, CAN1, CAN2, CAN3, CAN4
Driver Support
Operating Systems: Windows XP/2003/Vista/2008/7 x86/x64
Software
Operating Systems: Windows XP/2003/Vista/2008/7 (x86 and x64)
Libraries: Visual C/C++, Borland C/C++
test tools: LIKE CANTest for Windows XP/2003/Vista/2008/7 x86/x64
Physical Characteristics
Dimensions: 80 x 120 mm
Environmental Limits
Operating Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Power Requirements
Power Consumption: 300 mA @ 5 V
